Text the caller: WhatsApp and SMS from a call
Two worked examples — an insurance line that sends a renewal link on WhatsApp, and a loan line that sends a documents list by SMS — during the call and after it.
A phone call is a bad place to read out a link. This guide sets up two agents that do the sensible thing instead: they say what the customer needs, then send it — on WhatsApp or as an SMS — and tell the customer it's on its way.
Both come ready-made. In Agents, choose Start from a pre-built agent and pick Insurance advisor or Loan enquiries. Their instructions already cover when to offer a message, to ask first, and to say it was sent only after it was.
Note
An agent sends messages in two ways, and these examples use both. During the call, it sends a message when the customer asks for something. After the call, it sends one more, the same message every time, for the calls you choose. See Actions and After the call.
What the agent can and can't send
It can send only templates you prepared, with the blanks filled in. It never writes its own words into a WhatsApp or an SMS. That is a platform rule on WhatsApp, and a regulator's rule (DLT) for SMS in India, so the messages you see below are exactly what you approved.
| SMS | ||
|---|---|---|
| What it is | An approved Utility template | A DLT-approved template, sent through your own provider |
| Goes to | The number the customer called from | The same number, Indian mobiles only |
| Costs | Charged like any WhatsApp template | Billed by your SMS provider, not from your wallet here |
Example 1: an insurance line that sends a renewal link on WhatsApp
The template
On Templates, create a Utility template and get it approved:
Hi {{1}}, here is the link to renew your {{2}} policy. Please keep your policy
number handy. Reply here if you need help.
Give it a link button to your renewal page, with a fixed address (a button address with a blank in it can't be filled by an agent). Then open the approved template and tick Agents may send this during a call or chat.
The agent
Start from Insurance advisor, then on its Actions page switch on Send the customer a WhatsApp.
What the call sounds like
Agent Shield Insurance — how can I help?
Caller Mera health policy renew karna hai.
Agent Of course. Can I have your policy number, or the registered mobile number?
Caller Registered number is nine eight seven six…
Agent Thank you. And the date of birth on the policy?
Caller Twelve March, nineteen eighty-four.
Agent That matches. Your renewal is due on the twentieth. Shall I send the
renewal link on WhatsApp?
Caller Haan, bhej do.
→ the agent sends "renewal_link" with {{1}} = Rahul, {{2}} = health
Agent Done — it's on WhatsApp now. Anything else?
What the customer receives on WhatsApp:
Hi Rahul, here is the link to renew your health policy. Please keep your policy number handy. Reply here if you need help.
[ Renew now ]
Two things worth noticing. The agent asked first and sent only after a clear yes. And it said "on WhatsApp now" only after the send succeeded. If the send fails, the agent says so and offers to have a colleague send it, instead of pretending.
And after the call
Add a second message that goes out after every answered call. In the After the call card on the agent's Actions page:
- Send after: Calls somebody answered
- WhatsApp template: a Utility template such as
thanks_for_calling:
Hi {{1}}, thanks for calling {{2}} on {{3}}. Your request is noted — reply here
and we will help you further.
- Blanks: Customer's first name, Business name, Date of the call
An after-call template needs no tick. You choose it, so it's sent only to the people and calls you set.
Example 2: a loan line that sends a documents list by SMS
Set up SMS first
SMS in India needs a registered sender ID and templates, and your own provider. See SMS for each step and the provider list, including the PE–TM chain step that, if skipped, gets every message dropped.
On the SMS page, add a template exactly as your DLT portal approved it:
Dear {#var#}, thank you for contacting Sunrise Finance. Your documents list and
apply link: {#var#}
The second blank holds at most 30 characters, so use a short link like
sunrise.in/apply. Tick Agent may send this during a call or chat, then send a
test to your own mobile to check the provider, sender ID and DLT ids work together.
The agent
Start from Loan enquiries, then on its Actions page switch on Send the customer an SMS.
What the call sounds like
Agent Sunrise Finance — how can I help?
Caller I want to know about a personal loan.
Agent Happy to help. May I take your name?
Caller Priya Nair.
Agent Thanks, Priya. How much are you looking for?
Caller Around three lakh.
Agent Got it — three lakh. Are you salaried or self-employed?
Caller Salaried.
Agent Thank you. The lender confirms the rate after checking your documents.
Shall I text you the documents list and the apply link?
Caller Yes please.
→ the agent sends "loan_documents" with {#var#} = Priya, sunrise.in/apply
Agent Sent to your mobile. A colleague can call you back today — what time suits?
What Priya receives:
Dear Priya, thank you for contacting Sunrise Finance. Your documents list and apply link: sunrise.in/apply
Notice what the agent didn't do: it didn't promise approval, quote a rate it wasn't given, or ask for a PAN or Aadhaar number on the call. Those rules are in the prebuilt agent's instructions.
And after the call
Send every caller one more message, in both channels. In After the call, choose Every call, a WhatsApp Utility template and an SMS template. For example the WhatsApp one:
Hi {{1}}, thanks for contacting {{2}}. Your enquiry is noted and a colleague will
call you back. Reply here if anything changes.
and the SMS one (DLT-approved):
Dear {#var#}, your enquiry with {#var#} is noted. A colleague will call you back.
Both blanks are filled from Customer's first name and Business name. The same caller gets at most one of each a day, even if they ring three times, and nobody on your do-not-contact list gets either.
Checklist before going live
1. Connect what you'll send through
WhatsApp connected, and for SMS your provider with a passing test.
2. Get the templates approved
WhatsApp templates approved as Utility; SMS templates approved on DLT.
3. Tick the ones the agent may use mid-call
On the WhatsApp template and the SMS template. After-call templates don't need a tick.
4. Switch the tools on, per agent
Send the customer a WhatsApp and Send the customer an SMS, on the agent's Actions page. They start off.
5. Call it yourself first
From your own phone. Check what arrives, that it arrives once, and that the agent says it was sent only after it was.
If it didn't send
| What you see | Usually means |
|---|---|
| The tool says not ready on the Actions page | Nothing is ticked, the provider isn't connected, or the only ticked templates have a link blank |
| The agent offers to send, then says it couldn't | An unapproved template, an SMS your provider refused, or a number it can't use. The agent tells the customer plainly and offers another way. Try it in a test call to hear which |
| A web call sent nothing | A call with no phone number has nowhere to send to. The agent says so |
| No after-call message | The call didn't match Send after, the number was on the do-not-contact list, or it already got one in the last 24 hours |
| SMS refused by the provider | The text here differs from the DLT template, or your provider isn't in your PE–TM chain. See SMS |
From the API
Everything here is also in the API:
# Allow an agent to send a WhatsApp template in a call (needs a full key)
curl -X PATCH https://app.katexs.com/api/v1/templates/renewal_link \
-H "Authorization: Bearer $API_KEY" \
-H "Content-Type: application/json" \
-d '{ "agentMaySend": true }'
# Allow an agent to send an SMS template in a call
curl -X PATCH https://app.katexs.com/api/v1/sms/templates/$TEMPLATE_ID \
-H "Authorization: Bearer $API_KEY" \
-H "Content-Type: application/json" \
-d '{ "agentMaySend": true }'
